Constructor: Storage Solutions Tailored to Your Needs
Pallet Pull-Out Units
Goods or pallets stored on Pull-Out Units can be picked directly from the racking.
Releasing the safety catch and pulling on the unit’s handle brings the Pull-Out Unit forward, making the stored goods fully accessible.
- Floor or beam mounted Pull-Out Units
- Universal units that can be mounted onto beams
- Special dimension pallets can be catered for
- All loads are based on uniformly distributed pallet loads
Used to segregate long goods when stored vertically. Allows fast and direct access.
VERTICAL LOOP DIVIDER
Used to support long products which store vertically. Allows fast and direct access.
HORIZONTAL STANDING DIVIDER
Designed for the safe vertical storage of long flat goods. Allows for fast and direct access.
HORIZONTAL HANGING DIVIDER
Suspended below front and back beams to store vertical goods. Allows easy access.
Placed between two CR18 beams, a chipboard shelf allows a lower beam level to be used as a manual picking shelf.
Fixed wooden plank shelving available open or closed, rough or planed depending on use.
A strong mesh shelf ideal for storing liquids allowing spills to pass through the shelf to be caught in a drip tray.
Allows forks to pass under the load when not on a pallet.
Full support front to back for cable reels and large drums or canisters.
Placed on the racking beams to allow the storage of barrels or cable reels to prevent them from rolling. Options available:
PALLET SUPPORT BARS
Placed in pairs on racking beams to allow storage of undersized pallets Options available:
HALF PALLET SUPPORT
Placed on the racking beams to allow storage of undersized pallets. Options available:
VERTICAL & HORIZONTAL PALLET STOPS
A useful safety feature which prevents pallets from falling from the back of the rack.
STEEL SHELF PANELS
900W x 455W mm (140kg UDL per panel)
900W x 530W mm (140kg UDL per panel)
1100W x 455W mm (140kg UDL per panel)
1100W x 530W mm (140kg UDL per panel)
WIRE MESH SHELVING
Placed on the beams to support undersized pallets or boxes. Often used in warehouses with a sprinkler system to allow the flow of water in the event of a fire.
FRAME PROTECTOR KIT
Up to 400 mm high with a solid panel, available in a variety of lengths to suit
your frame size.
Designed as collision and impact protection and made from 3 mm thick material.
These tubular barriers are 500 mm high and made from tough steel, are built to withstand the challenges of everyday activities.
METAL SAFETY BOLLARD
Available in either painted or galvanized finish they offer sturdy protection for vulnerable areas such as doorways.
Designed to protect the end of racks as well as pedestrian walkways and made from 5mm thick material to offer sturdy protection.
Prevents any risk of spillage from pallets, offering protection for a variety of scenarios.
METAL COLUMN GUARD
Protects pallet racking uprights from low-level fork and truck impact. Available 400 mm is high to meet FEM regulations.
METAL CORNER COLUMN GUARD
Protects pallet racking uprights from low-level fork and truck impact. Available 400 mm high to meet FEM regulations. Ideal corner protection for the pallet racking uprights.
UPRIGHT COLUMN GUARD
Bolted to the front of the racking upright, the metal guard offers protection with shock-absorbing foam inside.
PROTECT-IT PLASTIC GUARD
Absorbs heavy impacts, simple to attach allows for regular inspection and costs effective to change when damaged.
SACRIFICIAL LEGS (incl. upright section)
A non-load bearing, a removable section of upright, replaceable if damaged, without the need to unload a complete bay.
SHOCK ABSORBING GUARD
Specifically designed for protection of uprights placed on corners in a warehouse. A roller at the base helps deflect impacts.
Credits: Photographs are courtesy of Constructor
EXPLORE MORE ABOUT CONSTRUCTOR CR18 ACCESSORIES